Extrusion

FILMATIC

From surface winder to high-end winder - Highest winding quality at any time

Get in touch

From the melt to the film roll – all from a single source.

The FILMATIC winding portfolio is unique in the market. From surface winder to high-end winder with precise regulation of the winding process – W&H offers tailored solutions for every requirement.

FILMATIC II V

FILMATIC II V

The new blown film winder for Varex ll. In addition to the well known features, the surface winder offers safe and easy handling and maxium roll quality by surface winding from cut to cut.

Configuration

  • Safe and easy operations
  • surface, center and gap winding
  • Reverse winding
  • 90° cut with unique vacuum-cutover-drum technology
  • Intuitive HMI
  • Singe point of semi-automatically handling for Roll and winding shaft
  • web threading aid for face-2-face and back-2-back layout available
  • Easily retrofitable due to modular system
  • Reproducible winding settings
  • Compatible to TURBOSTART and EASY-2-Change

Technical Specification

Film widths1300 – 3600 mm (51 – 142")
Film thickness20 – 250 μm (0.8 – 9.8 mil)
Roll diameter max.1200 mm (47")
Core i.d.76 – 152 mm (3 – 6")
Speed max.300 m/min (984 ft/min)

FILMATIC PS

FILMATIC PS

Fully automated high-performance turret winder for stretch film applications

PS (Performance Stretch) represents superb film roll quality when producing stretch film. Two winding units positioned on top of each other in a laterally offset arrangement and the unique winding shaft bearing assembly ensure perfect roll edges. Identical web paths through both wind units guarantee consistent roll quality. Furthermore, the FILMATIC PS offers an innovative feature to optimize and maintain the winding hardness during winding.

Configuration

Configuration

  • Surface/center drive
  • Adhesive-free web transfer
  • Right-angled cut
  • Winding hardness control
  • Fully automatic core loading for various film dimensions
  • Fully automatic roll handling
  • Roll delivery table or robot interface

Technical Specification


Film widths2000 – 4500 mm (79 – 177")
Film thickness8 – 30 μm (0.3 – 1.2 mil)
Roll diameter max.max. 406 mm (16")
Core i.d.50,8 mm (2"), 76 mm (3")
Speed max.max. 800 m/min (2624 ft/min)

FILMATIC II T

FILMATIC II T

The innovative turret winder provides highest winding quality maintaining a small footprint.

The new FILMATIC II T winder is characterized by its compact design made possible by arranging the two winding stations one above the other, therefore requiring less floor space. In addition to the new operation and safety concept, the maximum possible roll diameter has been increased in the second generation, which results in an additional 17,5% of film on a roll.

Configuration

Configuration

  • Center drive
  • Gap winding function
  • Reverse winding capability
  • Adhesive-free web transfer

Technical Specification


Film widths1300 – 3600 mm (51" – 142")
Film thickness10 – 250 μm (0.4 – 9.8 mil)
Roll diameter max.max. 864 mm (34.0")
Core i.d.76 – 152 mm (3"– 6")
Speed max.max. 250 m/min (820 ft/min)

FILMATIC II O

FILMATIC II O


The Filmatic II O is optimized to cover the product range of the OPTIMEX II blown film line.


The OPTIMEX II is in turn optimized to cover the requirements of the most common blown film products ranging from collation shrink films with multiple ups and lamination films with moderate surface properties to shrink and stretch hoods.


With the introduction of the OPTIMEX II, the FILMATIC II O was completely redesigned with a new roll change system. In the main winding direction, the flying knife cuts the film allowing the film roll to remain in contact with the contact roller. This feature is complemented by a lay-on roller, which can control the amount of air entrapment inside the film roll. The newcomer also features reverse winding as well a state-of-the art safety concept and is available for working width of up to 2600 mm.


Configuration

Configuration

  • Center drive
  • Contact winding
  • Back-to-back installation or face-to-face installation
  • Gap winding and reverse winding capability

Technical Specification


Film widths1300 – 2600 mm (51 – 102")
Film thickness20 – 250 µm (0.8 – 9.8 mil)
Roll diameter max.max. 1200 mm (47")
Core i.d.76 – 152 mm (3 – 6")
Speed max.150 m/min (492 ft/min)

FILMATIC N

FILMATIC II N

Modular surface/center/gap winder for demanding applications, with optional automation levels.

The FILMATIC II N was developed for perfect roll quality, even for films that are difficult to process. Two independently operating center drives provide precise tension control during indexing, while a weight-compensated and highly accurate lay-on roll ensures perfect roll edges during gap winding from the moment the new roll is started.

Configuration

Configuration

  • Center drive from roll start
  • Gap winding from roll start
  • Reverse winding capability
  • Roll start without web tail foldback
  • Right-angled cut
  • Vacuum cutover drum
  • Automatic core placement and set-up
  • Automatic roll handling

Technical Specification


Film widths1300 – 3600 mm (51 – 142")
Film thickness10 – 250 µm (0.4 – 9.8 mil)
Roll diameter max.max. 1500 mm (59")
Core i.d.76 – 203 mm (3 – 8")
Speed max.max. 300 m/min (984 ft/min)

FILMATIC II TC

FILMATIC II TC

Innovative universal turret winder for superb roll quality

Precise control of winding tension, adhesive-free web transfer at roll change, center and gap winding right from the startup or handling and automation facilities are only some of the highlights the FILMATIC II TC has to offer.

Configuration

Configuration

  • Center drive
  • Precise control of winding tension
  • Minimum shaft deflection
  • Slitting station for multiple ups
  • Gap winding capability from roll start
  • Handling and automation facilities

Technical Specification


Film widths2100 – 4000 mm (79 – 157")
Film thickness20 – 300 µm (0.4 – 11.18 mil)
Roll diameter max.max. 1300 mm (51")
Core i.d.76, 152, 203 mm (3, 6, 8")
Speed max.max. 400 m/min (1312 ft/min)