Extrusion

FILMATIC

From surface winder to high-end winder - Highest winding quality at any time

Get in touch

From the melt to the film roll – all from a single source.

The FILMATIC winding portfolio is unique in the market. From surface winder to high-end winder with precise regulation of the winding process – W&H offers tailored solutions for every requirement.

FILMATIC II S

FILMATIC II S

The FILMATIC II S is a modularly designed surface winder featuring taper tension as well as taper contact pressure control for automatic adjustment to the increasing roll diameter.

Configuration

  • Center drive
  • Gap winding function
  • Reverse winding capability
  • Roll start without web tail foldback
  • Right-angled cut with vacuum cut-over drum
  • Tube cut blocking
  • Back-to-back or face-to-face installation

Technical Specification

Film widths1300 – 3600 mm (51 – 142")
Film thickness20 – 250 μm (0.8 – 9.8 mil)
Roll diameter max.1200 /1500 mm (47/59")
Core i.d.76 – 152 mm(3 – 6")
Speed max.300 m/min (984 ft/min)

FILMATIC PS

FILMATIC PS

Fully automated high-performance turret winder for stretch film applications

PS (Performance Stretch) represents superb film roll quality when producing stretch film. Two winding units positioned on top of each other in a laterally offset arrangement and the unique winding shaft bearing assembly ensure perfect roll edges. Identical web paths through both wind units guarantee consistent roll quality. Furthermore, the FILMATIC PS offers an innovative feature to optimize and maintain the winding hardness during winding.

Configuration

Configuration

  • Surface/center drive
  • Adhesive-free web transfer
  • Right-angled cut
  • Winding hardness control
  • Fully automatic core loading for various film dimensions
  • Fully automatic roll handling
  • Roll delivery table or robot interface

Technical Specification


Film widths2000 – 4500 mm (79 – 177")
Film thickness8 – 30 μm (0.3 – 1.2 mil)
Roll diameter max.max. 406 mm (16")
Core i.d.50,8 mm (2"), 76 mm (3")
Speed max.max. 800 m/min (2624 ft/min)

FILMATIC II T

FILMATIC II T

The innovative turret winder provides highest winding quality maintaining a small footprint.

The new FILMATIC II T winder is characterized by its compact design made possible by arranging the two winding stations one above the other, therefore requiring less floor space. In addition to the new operation and safety concept, the maximum possible roll diameter has been increased in the second generation, which results in an additional 17,5% of film on a roll.

Configuration

Configuration

  • Center drive
  • Gap winding function
  • Reverse winding capability
  • Adhesive-free web transfer

Technical Specification


Film widths1300 – 3600 mm (51" – 142")
Film thickness10 – 250 μm (0.4 – 9.8 mil)
Roll diameter max.max. 864 mm (34.0")
Core i.d.76 – 152 mm (3"– 6")
Speed max.max. 250 m/min (820 ft/min)

FILMATIC O

FILMATIC O

Optimized surface/center winder for OPTIMEX applications.

The FILMATIC O is specially designed for use downstream of OPTIMEX blown film lines. Its modular design allows the winder to be tailored to specific user requirements and products.

Configuration

Configuration

  • Center drive
  • Tube cut blocking
  • Back-to-back installation

Technical Specification


Film widths650 – 2200 mm (26 – 87")
Film thickness20 – 250 µm (0.8 – 9.8 mil)
Roll diameter max. max. 1200/1500 mm (47/59")
Core i.d.76 – 152 mm (3 – 6")
Speed max.max. 150 m/min (492 ft/min)

FILMATIC N

FILMATIC II N

Modular surface/center/gap winder for demanding applications, with optional automation levels.

The FILMATIC II N was developed for perfect roll quality, even for films that are difficult to process. Two independently operating center drives provide precise tension control during indexing, while a weight-compensated and highly accurate lay-on roll ensures perfect roll edges during gap winding from the moment the new roll is started.

Configuration

Configuration

  • Center drive from roll start
  • Gap winding from roll start
  • Reverse winding capability
  • Roll start without web tail foldback
  • Right-angled cut
  • Vacuum cutover drum
  • Automatic core placement and set-up
  • Automatic roll handling

Technical Specification


Film widths1300 – 3600 mm (51 – 142")
Film thickness10 – 250 µm (0.4 – 9.8 mil)
Roll diameter max.max. 1500 mm (59")
Core i.d.76 – 203 mm (3 – 8")
Speed max.max. 300 m/min (984 ft/min)

FILMATIC II TC

FILMATIC II TC

Innovative universal turret winder for superb roll quality

Precise control of winding tension, adhesive-free web transfer at roll change, center and gap winding right from the startup or handling and automation facilities are only some of the highlights the FILMATIC II TC has to offer.

Configuration

Configuration

  • Center drive
  • Precise control of winding tension
  • Minimum shaft deflection
  • Slitting station for multiple ups
  • Gap winding capability from roll start
  • Handling and automation facilities

Technical Specification


Film widths2100 – 4000 mm (79 – 157")
Film thickness20 – 300 µm (0.4 – 11.18 mil)
Roll diameter max.max. 1300 mm (51")
Core i.d.76, 152, 203 mm (3, 6, 8")
Speed max.max. 400 m/min (1312 ft/min)

We are there for you 24/7 - W&H Services

Remote Service

Our product specialists can connect directly to your machine via Internet. The solution is just a click away.

Support

24/7-Hotline

Our worldwide Information and Diagnostic Center offers qualified support 365 days a year, 24 hours a day.

Support

Academy

Develop your experts to make the most of your production. Discover our individual training sessions

Training

Retrofit

Upgrade your extrusion lines with new modules to increase their performance.

Upgrade